Three-in-one mode is adopted: reducer, motor and brake form an integrated gear motor.
制動器采用平面彈簧加壓電磁制動，制動率182%，快速剎車為0.05s至0.07s，非石棉物剎車盤干式摩擦，整體剎車制動器配置鈦質蓋板防止潮濕剎車失靈，帶手動釋放（自動返回制動位置），可保全天滿負荷運轉工作。全波切換半波快速制動整流器輸入電壓270VAC 50/60Hz，絕緣耐壓1800VAC 50Hz 1min，剎車100萬次壽命。
The brake adopts flat spring-loaded electromagnetic brake.Its braking rate is 182%, and quick brake time is 0.03s to 0.05s. The fast brake locking value is less than 5cm.With the non-asbestos brake disc dry friction, the overall brake is equipped with titanium cover plate to prevent the damp brake from malfunctioning, which can keep working at full load all day. The input voltage of the fast brake rectifier is 270VAC 50/60Hz, the insulation withstand voltage is 1800VAC 50Hz 1min, and the service life is 1 million times.
The motor adopts aluminum alloy hot high-pressure casting, all copper wire copper enameled wire through deep dipping, insulation class F, protection class IP55, working system S1 operation, moisture-proof and dust-proof fully sealed. Suitable for outdoor working environment +80 ℃ to -25 ℃, and not suitable for direct corrosion of objects, the motor power is more than 1.2 times the national standard value.
The special reducer (reduction motor) uses 20CrMnTi gear steel, which is carburized to ensure the hard tooth surface and strength, and is processed by CNC precision grinding to ensure the technical requirements of gear hardness and accuracy. Reducer load operation noise is less than 52dB (A), fully sealed and no oil leakage, maintenance-free and zero-fault design method is adopted.